3D Scanning and Reverse Engineering
You have the part but no CAD file: it's the problem we solve most often. We scan your component at our own facility and turn the scan data into a clean, editable CAD model built for manufacturing. Once approved, the model goes straight into production under the same roof.
Let's assess your part. With a photo, rough dimensions and the material, we scope the work and the timeline within 24 hours. The firm price is set once the part is in our hands.
Get a quote for 3D Scanning and Reverse EngineeringEditable CAD
Not a raw scan mesh but a clean model you can actually work on and manufacture.
Complex geometry captured
Surface contours, fine detail and reachable internal features all enter the scan data.
Scanning and production
Your part is scanned, modeled and taken into production under the same roof.
Your part never leaves the facility
Scanning, modelling and production in one place; your part doesn't change hands along the way.
AT A GLANCE
- Lead time
- A few business days for most
- Delivery format
- The CAD format you prefer
- Accuracy
- Set per part, agreed up front
- Confidentiality
- Confidential by default · NDA on request
We don't hand over a model and step away
Zenis is a manufacturer, not a broker. Once approved, your model goes into MJF production at our Istanbul facility, with FDM or SLA stepping in where the geometry or end use calls for them. Post-processing and dimensional measurement happen under the same roof, so parts arrive ready for assembly. And because production needs no tooling there is no volume pressure: the same model serves a single replacement part and recurring runs of end-use parts alike.
From part to model: how it works
- 01
Initial details and quote
Share a photo of the part, its approximate dimensions and its material. Tell us what you need, too: only the CAD model, or the part remade. With that we scope the work and the timeline.
- 02
Send us the part
Ship it to us or drop it off in person at our Istanbul facility. Once the part is in our hands we finalise the price and the lead time.
- 03
3D scanning
The part's geometry is captured by scanning, including surface contours, fine details and reachable internal features.
- 04
Model creation
The scan data is reverse-engineered into a clean, editable CAD model: something you can actually work with, not a raw mesh.
- 05
Delivery and revision
We deliver the model in your preferred format, make any adjustments together and you sign off on the final version.
- 06
Into production
With your approval the model goes straight to the production line. MJF is our area of expertise, with FDM or SLA stepping in where geometry or end use requires it.
When it's the right approach
Four scenarios cover most of the work we do in this service. Once the model is approved, the job usually continues on one of the lines below.
Discontinued spare parts
When the original manufacturer no longer supplies a gear, bracket, housing or coupling, we digitize it so you can reproduce it on demand. The machine keeps running without depending on a supplier.
Common in: automotive aftermarket, industrial machinery, energy
Pre-CAD legacy parts
Old machine components that never had a drawing get a proper model and access to modern manufacturing methods, putting long-term availability on solid ground.
Common in: heavy machinery, production equipment, medical devices
Production tooling
Once benchtop jigs and clamping fixtures are digitized, they can be reproduced identically across lines and facilities.
Common in: automotive assembly, electronics manufacturing, aerospace
Parts marked for improvement
With an accurate digital base, a design can be revised, lightened and adapted for additive manufacturing through DfAM.
Common in: product development, robotics, mechanical engineering
FAQS